PORSCHE 911 TURBO DC CAP
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1998-05 (includes uncategorized and accessory items)
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$7,034.50
Make a selection
Set of four wheel center caps, highly polished, with monochrome Porsche crest. This wheel center caps set adds a destinctive look, in motion and at rest. Suitable for the 19-inch turbo wheel only.
General Fitment ACCESSORY
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$8,299.50
Make a selection
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$8,085.00
Make a selection
Agency power is proud to release its new GT2rs inspired 1 piece monoblock wheel for the Porsche 996 and 997 widebody cars. The multi-spoke design features offset windows and uniquely designed curved elements to the center of the wheel. These wheels are only available in 19x8.5 and 19x12 and are sold as a set of 4.
The rear wheel offers a more aggressive concavity with an equally stunning front fitment. The front wheel weighs 21lbs where the rear weighs 24lbs. These wheels are built for a more aggressive look and fitment to truly sit flush with the fender wells. The wheels are designed to work with OEM lug bolts and do not require spacers. Each wheel includes your choice of ap engraved center cap color, or yo...(choose a part on the right to read more)
General Fitment 911 1998-05 911 TURBO/GT2 2001-05 911 2005-08
$4,250.95
Make a selection
The clutch masters fx350 system uses the power plus i pressure plate with a steel back segmented kevlar disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp no2.
The fx350 features only slightly increased pedal pressure, long life disc and positive engagement.
The clutch masters fx350 system:
Heavy-duty street & racing system
Holding capacity 110% over stock
Heavy-duty reinforced pressure plate
Hi-leverage pressure ring design ...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,502.96
Make a selection
Scavenging and aeration in the oil pan have been identified as a problem in the 996, 997 and Boxster models that experience high g-forces on the racetrack.
FVD has the solution:
The ?FVD motorsport? Oil pan has the baffling concept of the x51 oil pan. It also increases the oil capacity because the pan is deeper. This pan adds close to 3/4 of quart (0.6 liters) of oil over the original x51 pan. This allows for increased oil cooling and engine performance by preventing oil starvation and oil foaming.
The ?FVD motorsport? Oil pan is also designed with external cooling fins
Which helps to lower the oil temperature.
Models: Boxster, Cayman, 996 and 997 models (excludes 3.8 s, GT3 and turbocharged models).
...(choose a part on the right to read more)
General Fitment 911 2005-08 911 1998-05 CAYMAN 2006-08 BOXSTER 2005-08 BOXSTER 1997-04
From $544.50
Make a selection
The clutch masters fx350 system uses the power plus i pressure plate with a steel back segmented kevlar disc. Rigid disks can be used with aftermarket lightweight flywheels only. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp no2.
The fx350 features only slightly increased pedal pressure, long life disc and positive engagement.
The clutch masters fx350 system:
Heavy-duty street & racing system
Holding capacity 110% over stock
Heavy-duty reinforced pressure plate
Hi-leverage pressure ring design
Sprung hub/cu...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,502.96
Make a selection
FVD Brombacherhas a long tradition of offering high quality, extensively tested, easily installed tuning products that offer proven performance. Those high standards naturally led us to the innovative pro design (ipd) plenum product.
The ipd patented cast aluminum intake plenum with the larger 82 mm (gt3) throttle body (competition plenum) increases horsepower and torque by optimizing and increasing airflow into the intake manifold.
The factory plastic "t" style intake creates airflow turbulence, which deprives the motor of air, robbing hp and torque. Ipds "y" style plenum smoothly channels the airflow towards the left and right cylinder banks. The engine receives a larger mass of air at a higher vel...(choose a part on the right to read more)
General Fitment 911 2005-08 911 1998-05
From $1,307.90
Make a selection
Kit includes:
Software fast load power-flow kit, header system, sportmufflers
Genuine:
Engine - 6 cylinder boxer
Capacity - 3596ccm
Compression ratio - 11,3:1
Max. Power - 235kw (320hp) @ 6800rpm
Max. Torque - 370nm (273lbf ft) @ 4250rpm
Max. Speed - 285km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 5.0s
Tuning:
Max. Power - 250kw (340hp) @ 7000rpm
Max. Torque - 400nm (295lbf ft) @ 4500rpm
Max. Speed - 295km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.7s
For 20 years, FVD-Brombacherhas been setting the standard for Porsche tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining the drivability and most ...(choose a part on the right to read more)
General Fitment 911 1998-05
$5,331.70
Make a selection
Agency power is proud to release its new GT2rs inspired 1 piece monoblock wheel for the Porsche 996 and 997 widebody cars. The multi-spoke design features offset windows and uniquely designed curved elements to the center of the wheel. These wheels are only available in 19x8.5 and 19x12 and are sold as a set of 4.
The rear wheel offers a more aggressive concavity with an equally stunning front fitment. The front wheel weighs 21lbs where the rear weighs 24lbs. Our wheels are built for a more aggressive look and fitment to truly sit flush with the fender wells. The wheels are designed to work with OEM lug bolts and do not require spacers. Each wheel includes your choice of ap engraved center cap color, or you ...(choose a part on the right to read more)
General Fitment 911 1998-05 911 TURBO/GT2 2001-05 911 2005-08
$4,250.95
Make a selection
The clutch masters fx350 system uses the power plus i pressure plate with a steel back segmented kevlar disc. Rigid disks can be used with aftermarket lightweight flywheels only. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp no2.
The fx350 features only slightly increased pedal pressure, long life disc and positive engagement.
The clutch masters fx350 system:
Heavy-duty street & racing system
Holding capacity 110% over stock
Heavy-duty reinforced pressure plate
Hi-leverage pressure ring design
Sprung hub/cu...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,502.96
Make a selection
The clutch masters fx350 system uses the power plus i pressure plate with a steel back segmented kevlar disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp no2.
The fx350 features only slightly increased pedal pressure, long life disc and positive engagement.
The clutch masters fx350 system:
Heavy-duty street & racing system
Holding capacity 110% over stock
Heavy-duty reinforced pressure plate
Hi-leverage pressure ring design ...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,502.96
Make a selection
Kit includes:
Fast load software, power-flow kit
Genuine:
Engine - 6 cylinder boxer
Capacity - 3596ccm
Compression ratio - 11,3:1
Max. Power - 235kw (320hp) @ 6800rpm
Max. Torque - 370nm (273lbf ft) @ 4250rpm
Max. Speed - 285km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 5.0s
Tuning:
Max. Power - 243kw (330hp) @ 7000rpm
Max. Torque - 385nm (284lbf ft) @ 4500rpm
Max. Speed - 291km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.8s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of soft...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,815.00
Make a selection
Kit includes:
Ecu exchange for non e-throttle models (fast load for e-throttle models), power-flow kit, header system, sportmufflers
Genuine:
Engine - 6 cylinder boxer
Capacity - 3387ccm
Compression ratio - 11,3:1
Max. Power - 221kw (300hp) @ 6800rpm
Max. Torque - 350nm (258lbf ft) @ 4600rpm
Max. Speed - 280km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 5.2s
Tuning:
Max. Power - 239kw (325hp) @ 7000rpm
Max. Torque - 370nm (273lbf ft) @ 4500rpm
Max. Speed - 287km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.9s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led...(choose a part on the right to read more)
General Fitment 911 1998-05
$8,149.90
Make a selection
Kit includes:
Software fast load, power-flow kit, header system, TUV "oe look" sportmufflers
Genuine:
Engine - 6 cylinder boxer
Capacity - 3596ccm
Compression ratio - 11,3:1
Max. Power - 235kw (320hp) @ 6800rpm
Max. Torque - 370nm (273lbf ft) @ 4250rpm
Max. Speed - 285km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 5.0s
Tuning:
Max. Power - 250kw (340hp) @ 7000rpm
Max. Torque - 400nm (295lbf ft) @ 4500rpm
Max. Speed - 295km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.7s
For 20 years, FVD-Brombacherhas been setting the standard for Porsche tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining the driv...(choose a part on the right to read more)
General Fitment 911 1998-05
$7,961.80
Make a selection
Kit includes:
Ecu exchange for non e-throttle models (fast load for e-throttle models), power-flow kit, header system, sport catalytic kit, sport camshafts
Genuine:
Engine - 6 cylinder boxer
Capacity - 3387ccm
Compression ratio - 11,3:1
Max. Power - 221kw (300hp) @ 6800rpm
Max. Torque - 350nm (258lbf ft) @ 4600rpm
Max. Speed - 280km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 5.2s
Tuning:
Max. Power - 246kw (335hp) @ 7000rpm
Max. Torque - 385nm (284lbf ft) @ 5000rpm
Max. Speed - 292km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.7s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 porsc...(choose a part on the right to read more)
General Fitment 911 1998-05
$8,958.40
Make a selection
Kit includes:
Ecu exchange for non e-throttle models (fast load for e-throttle models), power-flow kit
Genuine:
Engine - 6 cylinder boxer
Capacity - 3387ccm
Compression ratio - 11,3:1
Max. Power - 221kw (300hp) @ 6800rpm
Max. Torque - 350nm (258lbf ft) @ 4600rpm
Max. Speed - 280km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 5.2s
Tuning:
Max. Power - 232kw (315hp) @ 7000rpm
Max. Torque - 360nm (266lbf ft) @ 5000rpm
Max. Speed - 285km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 5.0s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management soft...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,205.60
Make a selection
B&b exhaust system Porsche 996 Carrera 99-03
With an increased flow capacity, the billy boat performance exhaust system introduces increased mid-range and top-end performance and lends a crisper, more commanding exhaust note without being intrusive. All emission devices are retained and the system is obd-ii compatible. There is no modification necessary for installation as the headers and mufflers are a direct replacement for the factory exhaust equipment.
Available with twin oval tips (fpor-2000), twin elliptical tips (fpor-2005), or quad tips twin turbo style (fpor-2010). Please select tip style below.
This product is made to order, please allow 7-10 days prior to shipment.
*cont...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,925.18
Make a selection
Multi-ground electrodes improve ignition capabilities and are less sensitive to increased voltage requirements due to gap growth. Designed to specific manufacturer ignition requirements in either supplementary gap, intermittent discharge, or semi-surface discharge, all for various firing tip self cleaning abilities. Multi-ground plugs maintain all features of ngk's traditional plugs including corrugated ribs, pure alumina-silicate ceramic insulator for greater strength and better heat transfer, copper core and triple interior seal. Sold each, fits these models:
911 c2/c4 1998-2003 (3.4l)
Boxster 1997-99
Cayenne s 2003-06
Cayenne turbo 2003-06
General Fitment BOXSTER 2005-08 BOXSTER 1997-04 911 1998-05 CAYENNE 2003-06
Kit includes:
Software fast load, power-flow kit, header system, sport catalytic kit, sport camshafts
Genuine:
Engine - 6 cylinder boxer
Capacity - 3596ccm
Compression ratio - 11,3:1
Max. Power - 235kw (320hp) @ 6800rpm
Max. Torque - 370nm (273lbf ft) @ 4250rpm
Max. Speed - 285km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 5.0s
Tuning:
Max. Power - 257kw (350hp) @ 7000rpm
Max. Torque - 410nm (302lbf ft) @ 4500rpm
Max. Speed - 298km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.5s
For 20 years, FVD-Brombacherhas been setting the standard for Porsche tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining t...(choose a part on the right to read more)
General Fitment 911 1998-05
$11,048.98
Make a selection
Kit includes:
Software fast load, sport air filter
Genuine:
Engine - 6cyl. Boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,4:1
Max. Power - 309kw (420hp) @ 6000rpm
Max. Torque - 560nm (413lbf ft) @ 3500-4500rpm
Max. Speed - 305km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 4.2s
Tuning:
Max. Power - 360kw (490hp) @ 6000rpm
Max. Torque - 735nm (542lbf ft) @ 4000rpm
Max. Speed - 318km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.9s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,538.90
Make a selection
The rh turbo style Porsche wheel is a classic design perfectly suited for any Porsche model. The center section is cast aluminum and finished in a silver paint. The wheels come with standard rh center cap and accept factory Porsche wheel bolts and center caps. The wheels are offered in 17 and 18 with a variety of offsets to fit narrow and wide body Porsche applications. These wheels are made to order and take between 1-3 weeks to deliver. We recommend ordering a set of rh valves, part # 12945281 when ordering this wheel. Sold individually.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipp...(choose a part on the right to read more)
Scavenging and aeration in the oil pan have been identified as a problem in 996 and Boxster models experiencing high g-forces on the racetrack. This oil pan spacer provides a simple solution. This spacer increases sump capacity by half a liter, providing more reserve to ward off starvation. Thisoil pan spacer clears all factory options including the rear skid plate. Added oil capacities as well as increased oil pan surface area increase oil cooling and engine performance. *oil pan and sump baffle are OEM parts and do not need to be purchased material: 6061 t6 aluminum alloy finish: clear anodized weight: n/a models: Boxster, Boxster s, and 996 models (excludes GT3 and turbocharged models) installation: for best...(choose a part on the right to read more)
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|